Smart Alarm
Camera Monitoring Alarm Solution
TimeTec Smart Gateway Camera is a high-performance motion detect camera that can detect motion according to 3 levels of sensitivity, i.e. low sensitivity, medium sensitivity and high sensitivity. You can control the camera and view your protected home via i-TimeTec application even from another part of the world as long as you are connected to the internet. When the alarm is armed, any detected motion will trigger the built-in siren and the camera will automatically send the captured video with the detected motion to your i-TimeTec account. We include an external siren so that the loud siren can alert people around and stop the intruder.

This camera monitoring alarm solution is not only helpful to detect intruder but also helps in monitoring elderly, patients or infant. Setting low sensitivity motion detection, you can eliminate false alarms by not missing major movements for eg patient falls from bed or etc.
Smart Gateway Camera
High-performance motion detect camera
  Brochure   User Guide
Built in Zigbee Gateway
Easy Installation
720P High Resolution
8m Remote night vision
PTZ Control
Panoramic monitoring
Cloud and Local Storage
Voice Intercom
Motion Sensor
Real-time alarm to i-TimeTec app
Send motion detected video clip to app immediately
Specification
Size : 85*106mm
Lens parameter : 100w resolution, 720p lens
Infrared distance : < 10m
Voice intercom : Two way
Storage : Support Micro SD card (max 128G), support Epicamera Cloud Storage
Installation : Wall mount, side mount, ceiling mount
Rotating Angle : Horizontal 0 to 340, vertically 80 upward and 10 downward
Wireless Communication Protocol : 2.4G Zigbee
Wifi Parameter : IEEE802.11b, 802.11g, 802.11n (Outdoor <100m, indoor <50m, depends on situation)
Smart Alert : Motion detect
Accessories : 1 Smart Gateway Camera maximum can connect to 36 devices
80db Siren
No Insrallation needed
Work with PIR and magnet sensors
Trigger camera to record immediately
Light and sound alert


Specification
Size : 90mm (diameter)*65mm
Alert method : Sound and light
Strobe light frequency : about 0.5s/time
Sound Intensity : Within 3m 70db
Working Frequency : 2.4Ghz
Alarm Current : 640mA
Communication Coverage : 100m (without barrier)
Power Supply Method : AC 180V - 250V 50 Hz
Wireless Communication Protocol : Zigbee
Working Environment : Temperature 10-50 °C / Humidity 5-95%
Siren
Set off alarm to alert everyone
  Brochure   User Guide